VERY HIGH SPEED EVAPORATION SOLVENT
for cleaning screen printing inks
in production
iBiotec® SERIMAX FAST 35
REMOVER SOLVENT
for washing of screen printing screens
and elastomeric pads
in pad printing
Eliminable with water
Immediate action
iBiotec® SERIMAX FAST 80
PHYSICAL-CHEMICAL CHARACTERISTICS
|
CHARACTERISTICS |
NORMS |
VALUES SERIMAX FAST 35 |
VALUES SERIMAX FAST 80 |
UNITS |
|
Aspect |
Visual |
Limpid |
Limpid |
- |
|
Colour* |
Visual |
Wan |
Amber |
- |
|
Smell |
Olfactory |
Fruity |
Fruity |
- |
|
Density at 25°C |
NF EN ISO 12185 |
918 |
977 |
kg/m3 |
|
Refractive index |
ISO 5661 |
1.3970 |
1.4270 |
- |
|
Freezing point |
ISO 3016 |
< -30 |
< -25 |
°C |
|
Solubility in water |
- |
Insoluble |
100 |
% |
|
Kinematic viscosity at 40°C |
NF EN 3104 |
1.0 |
2.4 |
mm²/s |
|
Acid index |
EN 14104 |
0 |
0 |
mg(KOH)/g |
|
Iodine index |
NF EN 14111 |
0 |
0 |
gI2/100g |
|
Water content |
NF ISO 6296 |
0 |
0.012 |
% |
|
Residue after evaporation |
NF T 30-084 |
0 |
0 |
% |
|
PERFORMANCE CHARACTERISTICS |
||||
|
CHARACTERISTICS |
NORMS |
VALUES SERIMAX FAST 35 |
VALUES SERIMAX FAST 80 |
UNITS |
|
Kauri Butanol index |
ASTM D 1133 |
177 |
190 |
- |
|
Evaporation speed |
- |
6 |
200 |
min |
|
Superficial tension at 20°C |
ISO 6295 |
24.8 |
34.5 |
dynes/cm |
|
Copper blade corrosion – 100 hours at 40°C |
ISO 2160 |
1a |
1a |
listing |
|
FIRE SECURITY CHARACTERISTICS |
||||
|
CHARACTERISTICS |
NORMS |
VALUES SERIMAX FAST 35 |
VALUES SERIMAX FAST 80 |
UNITS |
|
Flash point (isolation) |
ISO 2719 |
35 |
80 |
°C |
|
Self-ignition point |
ASTM E 659 |
> 200 |
> 230 |
°C |
|
Lower explosive limit |
NF EN 1839 |
0.4 |
0.7 |
% (volume) |
|
Upper explosive limit |
NF EN 1839 |
4.8 |
7.0 |
% (volume) |
|
TOXICOLOGICAL CHARACTERISTICS |
||||
|
CHARACTERISTICS |
NORMS |
VALUES SERIMAX FAST 35 |
VALUES SERIMAX FAST 80 |
UNITS |
|
Anisidine index |
NF ISO 6885 |
0 |
0 |
- |
|
Peroxide index |
NF ISO 3960 |
0 |
0 |
meq(O2)/kg |
|
TOTOX (anisidine index +2x peroxide index) |
- |
0 |
0 |
- |
|
CMR / irritant / corrosive substances content |
CLP regulation |
0 |
0 |
% |
|
Residual methanol content from transesterification |
GC-MS |
0 |
0 |
% |
|
ENVIRONMENTAL CHARACTERISTICS |
||||
|
CHARACTERISTICS |
NORMS |
VALUES SERIMAX FAST 35 |
VALUES SERIMAX FAST 80 |
UNITS |
|
Biodegradability |
OCDE 301 |
biodegradable |
easily biodegradable |
- |
|
Steam pressure at 20°C |
- |
1.2 |
0.1 |
kPa |
|
OVC (Organic-Volatile Compounds) content |
- |
100 |
60 |
% |
|
Sulphur content |
GC MS |
0 |
0 |
% |
|
Benzene content |
ASTM D6229 |
0 |
0 |
% |
|
Total halogen content |
GC MS |
0 |
0 |
% |
|
Chlorinated solvents content |
- |
0.00 |
0.00 |
% |
|
Aromatic solvents content |
- |
0.00 |
0.00 |
% |
|
Content of substances which are dangerous to the environment |
CLP Regulations |
0 |
0 |
% |
|
Content of compounds with PRP |
- |
0 |
0 |
% |
|
Content of compounds with ODP |
- |
0 |
0 |
% |
Looking for another product?
|
Discover our entire range by clicking on the photo |
.jpg)
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 